Be Careful! The threaded adapters are 3D printed and if installed incorrectly could be cross threaded and damaged.
It is recommended to install the threaded adapter without the NateChrony attached first, then slide on the NateChrony and fix it in place with the small philips head screw on the side.
The threaded adapters have been designed to be a tight fit when fully installed to the correct depth - a minimum depth of 10mm of threads. This ensures correct alignment and prevents thread failure when using the NateChrony.
For bullpups or where the barrel does not protrude past the air tank, you can mount the NateChrony on its side as required. You will need approximately 6-7mm of space between the barrel and tank.
Slimline adapter on a bullpup
Clearance between barrel and air tank
NateChrony mounted on its side
Regular Adapter
Last Updated: 2023-12-04 08:22:16 +1000 +1000